English

русский

español

中文

Home > Ventilation System >aluminum Air to air plate heat exchanger

Products

aluminum Air to air plate heat exchanger

  • AIR-ERV
  • 1

Details

detail of air heat exchanger:Aluminum Air to air plate heat exchanger

Sensible heat recovery air to air heat exchanger is used in comfortable air conditioning ventilation system and technical air conditioning ventilation system. Supply air and exhaust air totally separated, heat recovery in winter and cold recovery in Summer. Two neighbor (epoxy coating) aluminum foils form a channel for fresh or exhaust air stream. Heat is transferred when the air streams flow crossly through the channels, and fresh air and exhaust air is totally separated.

 Air to air heat exchanger

Features of Aluminum Air to air plate heat exchanger

1. Aluminum foils cross flow sensible heat exchanger

2. Heat recovery efficiency up to 75%

3. 2-side press shaping, double folded edge.

4. Resistance of pressure difference up to 2500Pa

5. Under pressure of 700Pa, air leakage less than 0.6%

Material type of Aluminum Air to air plate heat exchanger

Normal series (standard type)

Heat exchanger is made of pure aluminum foils, with galvanized end cover and aluminium alloy wrap angle. Max. air temperature 100°C, it is suitable for most of the occasion. 

Blue coating series ( Anti-corrosion type)

Heat exchanger is made of pure aluminum foils cover by special anti-corrosion material, with galvanized end cover and aluminium alloy wrap angle. it is suitable for the corrosive gas occasion.

Epoxy series (high temperature type)

Heat exchanger is made of pure aluminum foils, with galvanized end cover and aluminium alloy wrap angle. Sealing material is special and allow the Max. air temperature to be 200°C, it is suitable for special high temperature occasion.

 air heat exchanger

INSTALLATION NOTES

Condensing water pan

When designing heat recovery functional section in air handling unit, under the heat exchanger should add the condensing water pan, in case of disorderly flow of condensing water

Heat exchanger vertical installation

When outdoor temperature is lower than indoor temperature, during heat exchanging if RA temperature is low enough (relative humidity 100%) then condensing water will come into

being, once there is condensing water, heat exchange area inside heat exchanger is decreased, efficiency become lower and pressure drop increased, in order to eliminate the condensing

water in time, heat exchanger vertical installation like the picture below is the best choice.

air heat exchangerair heat exchanger

air to air aluminum frame for Air handling unit(AHU) specification

 Model Size A1=A2 Height Plate Distance
ERA- On Request On request 2.5-10.0

Installation

Pattern 1 and 2, to increase the heat exchange area, suitable for occasions requiring higher heat recovery efficiency,
however, air resistance will increase accordingly.

Pattern 3 and 4, to increase the front face area, suitable for occasions requiring large airflow, both air resistance and

heat recovery efficiency remain stable.

Pattern 5, to increase both front face area and heat exchange area, suitable occasions requiring higher heat recovery

efficiency and large airflow.

air heat exchanger 

 

 

Applications

Installed in air handling unit

AIR-ERV plate heat exchanger can be used in the air handling unit (AHU) as a main part of the heat recovery section, and the bypass can be built in when required.

air heat exchanger

 

 

Installed in ducts

It can also be installed in the ducts of ventilation system as a main part of the heat recovery section. The installation is very flexible.

 

AIRERV Factory

AIRERV  is one of the best manufacturer in ERV/HRV, heat exchanger and AHU area in China, founded in 1996, areas covered more than 30,000 square meters, turnover of 2012 is 42 million dollars, we have enthalpy testing lab. for products test. As a leader in energy/heat recovery equipments, we cooperate with more than 30 famous companies who located in Europe, the Middle east, Korea, Southeast Asia, Taiwan, etc. supplied equipment to Beijing Olympic and Shanghai Expo 2010, works together with domestic and international brands like Midea, Daikin,Shenling, etc.

AIRERV partner

AIR-ERV cooperate with world famous brand or offer OEM service including Midea,Shenling,Daikin, etc.

AIRERV certificate

AIR-ERV products stand for TOP quality in heat recovery ventilation filed in China, certificated by CE, Eurovent, ISO and other different approved tests like anti-flaming test, anti-mold test, energy saving product test. Etc.

air heat exchangerair heat exchangerair heat exchangerair heat exchanger

 

FAQ

What's the difference between sensible heat exchanger and total heat exchanger?
1.Sensible heat exchanger is made of Aluminium foil,total heat exchanger is made of paper.
2.Sensible heat exchanger only exchange heat,total heat exchanger can exchange both heat and humidity.
3.Sensible heat exchanger has longer life and higher pressure-resistance than total total exchanger.
   Because the paper heat exchanger are easy to be corroded by the water and dust in the air.The vent of 
   total heat exchanger is easy to be blocked and hard to be cleaned.This will lead to bad ventilated effect.

 

Welcome to our Aluminum Air to air plate heat exchanger.

Previous :Counterflow Air to air plate heat exchanger

Next :aluminum frame air to air for Air handling unit(AHU)

XIAMEN AIR-ERV Technology Co., Ltd

Tel: +86-86-592-5769019
Fax:+86-0592-7155233

Contact Person: Jeffrey
Mobile:+86-15105979197

Website:www.airerv.com


Send your inquiry directly to us Email:

(0 / 3000)

Related Products+More

jeffrey0748